Table of Contents
Advertisement
Be careful
not
to spill gasoline. Clean gasoline from
painted surfaces as soon as possible. See "Cleaning the
Outside of Your Vehicle" in the Index.
When you put the cap back on, turn it to the right
(clockwise) until you hear a clicking sound. Make sure
you fully install the cap. The diagnostic system can
determine if the fuel cap has been left off or improperly
installed. This would allow fuel to evaporate into the
atmosphere. See "Malfunction Indicator Lamp" in
the Index.
NOTICE:
If you need a new cap, be sure to get the right
type. Your dealer can get one for you. If you get
the wrong type, it may not fit properly. This may
cause your malfunction indicator lamp to light
and your fuel tank and emissions system may
be
damaged. See "Malfunction Indicator Lamp" in
the Index.
Checking Things Under the Hood
1
To open the hood, first pull
the handle inside the vehicle
on the lower driver's side of
the instrument panel.
Then go
t o
the front of the vehicle and release the
secondary hood release.
6-6
Advertisement
Table of Contents
