Table of Contents
Advertisement
Front Turn Signal Lamps
If you have fog lamps. the fog lamp bracket must be
removed before you can replace the front turn
signal lamps.
U
L
1
2. Turn the socket counterclockwise and pull it out.
3. Holding the base of the bulb, pull the bulb straight
out of the socket.
4. Push the new bulb into the socket until
it
clicks.
5. Put the socket back into the turn signal lamp
assembly and turn
it
clockwise until
it
locks
into place.
Front Sidemarker Lamps
1.
-.
?
3.
3.
5 .
I . Reach under the bumper and behind the turn s i p a l
lamp assembly.
6.
7 .
8.
9.
Remove the lens retaining screws.
Remove the sidemarker lens from the radiator grille.
Turn the bulb
and
socket one-quarter turn
counterclockwise.
Remove the bulb
and
socket from the lens.
Install the new bulb and socket to the
sidemarker lens.
Rotate the bulb and socket one-quarter of a
turn clockwise.
Install the sidemarker lens
to
the radiator grille.
Insert the tabs
into
the locators.
Install and tighten the screws.
6-36
Advertisement
Table of Contents
