How To Add Fluid - Chevrolet 1997 Blazer Owner's Manual

How to Add Fluid
Refer to the Maintenance Schedule to determine what
kind of transmission fluid to use. See "Recommended
Fluids and Lubricants" in the Index.
Add fluid only after checking the transmission fluid
HOT. (A COLD check is used only as a reference.) If
the fluid level is low, add only enough of the proper
fluid to bring the level up to the
HOT area for a hot
check. it doesn't take much fluid, generally less than
one pint (0.5
L). Don't
overfill.
3. Check both sides of the dipstick, and read the lower
level. The fluid level must be in the COLD area for a
cold check or in the HOT area or cross-hatched area
for a hot check.
4. If the fluid level is in the acceptable range, push the
dipstick back in all the way; then flip the handle
down to lock the dipstick in place.
I
NOTICE:
~ ~~ ~
We recommend you use only fluid labeled
DEXRON@-111, because fluid with that label is
made especially for your automatic transmission.
Damage caused by fluid other than DEXRON-111
is
not covered by your new vehicle
warranty.
After adding fluid, recheck the fluid level as
described under "How to Check."
When the correct fluid level is obtained, push the
dipstick back in all the way; then flip the handle
down to lock the dipstick in place.
6-17