Installing The Fireplace - Montigo R420 Installation Manual

Installing the Fireplace:

Place the Fireplace on the platform and install the Vent pipe, and Power Vent module. Next, connect the Gas line, and provide a gas service
shut-off valve; according to local gas codes. Before fastening in place, line up the front face of the fireplace (top and bottom), Figure 4.
Then, secure in place with 1/4"bolts and washers to the platform.
2" Clearance
Figure 4. Fireplace installation, (Inlet Gas & Power Vent).
Note: Images are shown without screens for clarity purposes.
However, your fireplace should not be operated without proper
installation of screens.
XG0770 - 150105.1
Installation
Intake / Exhaust
Vent Pipe (5"/8")
R320 & R420 Power Vent Indoor Gas Fireplace
1/2"
2" Clearance
Supply Gas
connection
Page 11