Changing The "Picture" Setting - Sony TRINITRON KV-SW292M50 Service Manual

x Changing the "Picture" setting
The "Picture" menu allows you to adjust the picture settings.
1
Press WEGA GATE and select "Settings".
2
Make sure the "Picture" icon (
selected, then press
3
Press V or v to select the desired item (e.g., "Picture Mode"), then press
Select
"Picture Mode"
"Color Temperature"
"Intelligent Picture"
* You can adjust the setting to your personal preference in the "Picture Adjustment" and
"Color Temperature" options only when the "Custom" mode is selected.
Adjusting the "Picture Adjustment" items under
"Custom" mode
1
Press V or v to select either "Picture" (contrast), "Brightness", "Color",
"Hue" (color tones) or "Sharpness", then press
Selecting "Reset" will set your TV to the factory settings.
2
Press V,v,B or b to adjust the setting of your selected item, then press
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select "Custom".
Note
• Reducing "Sharpness" can also reduce picture noise.
16
Menu Adjustment
) is
.
To
choose either "Vivid", "Standard" or "Custom"*
(see page 11).
adjust white color tint.
Choose either "Cool" (blue tint), "Neutral" (neutral tint) or
"Warm" (red tint).
optimize picture quality.
Press V or v to select "On", then press
To cancel, select "Off", then press
Picture
Picture Mode:
Picture Adjustment
Color Temperature:
Intelligent Picture:
Select Confirm
.
.
.
Vivid
Cool
On
End
.
.