Changing The "Picture" Setting - Sony TRINITRON KV-SP29M53K Service Manual

x Changing the "Picture" setting
The "Picture" menu allows you to adjust settings below.
1
Press WEGA GATE and select "Settings".
2
Make sure the "Picture" icon (
selected, then press
3
Press V or v to select the desired item (e.g., "Picture Mode"), then press
Select
"Picture Mode"
"Color Temperature"
"VM"
(Velocity Modulation)
"Intelligent Picture"
"Signal Level Indicator" display the signal level when the "Intelligent Picture" is
* You can adjust the setting to your personal preference in the "Picture Adjustment",
"Color Temperature" and "VM" options only when the "Custom" mode is selected
(see page 17).
16
Menu Adjustment
) is
.
To
choose either "Vivid", "Standard" or "Custom"* (see page 11).
adjust white color tint.
Choose either "Cool" (blue tint), "Neutral" (neutral tint) or
"Warm" (red tint).
sharpen the edges of each object.
Choose either "High", "Low" or "Off".
optimize picture quality.
Press V or v to select "On", then press
To cancel, select "Off", then press
functioning.
"Intelligent Picture Signal Level" indicator will be displayed,
followed by picture improvement when you change the
program number or the input mode.
red amber
(weak) (average)
Press V or v to select "On", then press
To cancel, select "Off", then press
functioning.
Picture
Picture Mode:
Picture Adjustment
Color Temperature:
VM:
Intelligent Picture:
Signal Level Indicator:
Select Confirm
.
.
green
(good)
.
. "Intelligent Picture" is still
Vivid
Cool
High
On
On
End
.