Changing The "Picture" Setting - Sony Trinitron WEGA KV-SR252 Operating Instructions Manual

x Changing the "Picture" setting
The "Picture" menu allows you to adjust the picture settings.
1
Press WEGA GATE and select "Settings".
2
Make sure the "Picture" icon (
selected, then press
3
Press V or v to select the desired item (e.g., "Picture Mode"), then press
Select
"Picture Mode"
"Color Temperature"
"Intelligent Picture"
* You can adjust the setting to your personal preference in the "Picture Adjustment" and
"Color Temperature" options only when the "Custom" mode is selected.
Adjusting the "Picture Adjustment" items under "Custom"
mode
1
Press V or v to select either "Picture" (contrast), "Brightness", "Color",
"Hue" (color tones) or "Sharpness", then press
Selecting "Reset" will set your TV to the factory settings.
2
Press V,v,B or b to adjust the setting of your selected item, then press
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select "Custom".
Notes
• "Hue" can be adjusted for the NTSC color system only.
• Reducing "Sharpness" can also reduce picture noise.
) is
.
To
choose either "Vivid", "Standard" or "Custom"* (see page 11).
adjust white color tint.
Choose either "Cool" (blue tint), "Neutral" (neutral tint) or
"Warm" (red tint).
optimize picture quality.
Press V or v to select "On", then press
To cancel, select "Off", then press
Picture
Picture Mode:
Picture Adjustment
Color Temperature:
Intelligent Picture:
Select Confirm
.
.
.
Menu Adjustment
Vivid
Cool
On
End
.
.
15