System For Displaying Program Output And Multi-View Output On Different Monitors (Use Of Side By Side Signal) - Panasonic AG-HMX100P Operating Instructions Manual

System for Displaying Program Output and Multi-view Output on Different
Monitors (Use of SIDE BY SIDE Signal)
SDI input 1 and SDI input 2 are paired to be used as
L-channel and R-channel input sources, respectively.
SDI input 3 and SDI input 4 are paired to be used as
L-channel and R-channel input sources, respectively.
The output is the SIDE BY SIDE signal to be transferred
Advanced reference signal*
Professional-use
3D-integrated camera
Professional-use camera
Loop-
through
Termination
Professional-use
camera
* Advanced reference signal need not necessarily be connected.
1
1
SDI (video and
audio) input
L
ADV-REF
R
SDI IN 1
SDI IN 2
L-channel
side
SDI IN 3
SDI IN 4
AG-HMX100P/HMX100E
R-channel
side
as a single-channel signal generated by compression of
L-channel and R-channel signals in the horizontal direction.
Program output and multi-view output are the same signal.
3D mode is set to [MODE2] ( page 25).
Program output
SDI output
SDI OUT PGM
Multi-view output
SDI OUT MULTI VIEW
Program output
DVI-D OUT PGM
Multi-view output
DVI-D OUT
MULTI VIEW
DVI-D output
Professional-use
3D monitor
P2 mobile
Home-use monitor
Professional-use
monitor
23