Setting The Fade [Fade]; Dsk Effects - Panasonic AG-HMX100P Operating Instructions Manual

The slope is set to specify the luminance level range of the
area to be removed. The setting value can be increased to
remove only the area of the luminance level closest to the
specified level.
Set [REVERSE] (reversing the key signal) to [ON] or [OFF]
using the rotary 4 control.
The factory default setting is [OFF].
Set [K LEVEL] (transparency level of the key) in the range
of [0] to [255] using the rotary 5 control.
The factory default setting is [255].
[CROP]
Settings can be made in the same way as in the [CROP]
submenu of the [PATTERN KEY] menu ( page 5).
DSK slide on/off [DSK ON/OFF]
The direction and time of the slide in/out operation can be
set for executing the downstream key.
[SLIDE I.] and [SLIDE O.] are effective if [KEY] is set to
[TITLE] in the [DSK SOURCE] submenu.
Rotary 1 Rotary 2 Rotary 3
DSK ME TRIG SLIDE I.
ON/OFF OFF
OFF OFF
ON
Operate the rotary 2 control to set whether or not to
execute downstream key additionally during auto transition
executed with the AUTO TAKE button.
The factory default setting is [OFF].
Operate the rotary 3 control to set the direction of the slide
in operation when DSK is ON.
The factory default setting is [OFF].
Operate the rotary 4 control to set the direction of the slide
out operation when DSK is ON.
w: Sliding toward the left
q: Sliding toward the right
e: Sliding toward the top
r: Sliding toward the bottom
The factory default setting is [OFF].
Operate the rotary 5 control to set the sliding speed.
Select an even number in the range of [2] to [64].
The factory default setting is [8].

[DSK EFFECTS]

Settings can be made in the same way as in the [EFFECTS]
submenu of the [TRANSITION] menu ( page 4).
12
Rotary 4 Rotary 5
SLIDE O. SPEED
OFF OFF 8
OFF 2-64

Setting the Fade [FADE]

The [DSK FADE] menu is used to set the fade effect
( page 11).
Rotary 1 Rotary 2 Rotary 3
FADE TO AUDIO
BLACK
BLACK ON
WHITE OFF
BLUE
Select the video color after fading from [BLACK], [WHITE],
and [BLUE] using the rotary 2 control.
The factory default setting is [BLACK].
Set [AUDIO] (sound fading) to [ON] or [OFF] using the
rotary 3 control.
The factory default setting is [ON].
Set [PHONE] (fading of headphones output) to [AFTER] or
[PRE] using the rotary 4 control. [AFTER] generates sound
with fade applied, while [PRE] generates sound without
fade.
The factory default setting is [AFTER].
Rotary 4 Rotary 5
PHONE
ON AFTER
AFTER
PRE