Setting The Title Key [Title Key] - Panasonic AG-HMX100P Operating Instructions Manual

[KEY]
Set [KEY] (key signal) to one of the following using the
rotary 2 control (for [EXT KEY] menu only).
When the system format is set to HD ( page Vol.1-19):
SDI1, SDI2, SDI3, SDI4, HDMI1, HDMI2, DVI-I
When the system format is set to SD ( page Vol.1-19):
SDI1, SDI2, SDI3, SDI4, VIDEO1, VIDEO2, DVI-I
The factory default setting is [SDI1] in each case.
To set the luminance key in detail
The color density and luminance level range can be
specified to designate more precise keying.
Set [SLICE] (slice level) in the range of [0] to [255] using
the rotary 3 control.
The factory default setting is [0].
The slice is set to specify the brightness level of the area to
be removed. The setting value can be increased to remove
only the area brighter than the specified area.
Set [SLOPE] in the range of [0] to [15] using the rotary 4
control.
The factory default setting is [15].
The slope is set to specify the luminance level range of the
area to be removed. The setting value can be increased to
remove only the area of the luminance level closest to the
specified level.
Set [K LEVEL] (transparency level of the key) in the range
of [0] to [255] using the rotary 5 control.
The factory default setting is [255].
[CROP]
Settings can be made in the same way as in the [CROP]
submenu of the [PATTERN KEY] menu ( page 5).
[EFFECTS]
Settings can be made in the same way as in the [EFFECTS]
submenu of the [TRANSITION] menu ( page 4).
[BORDER]
Settings can be made in the same way as in the [BORDER]
submenu of the [CHROMA KEY] menu ( page 7).
8

Setting the Title Key [TITLE KEY]

A still picture saved in memory from the [DSK] menu can
be keyed as a title.
Title keys are saved as patterns of the numbers with "1"
as the last digit every 10th (9511, 9521,...) in the range
of 9501 to 9791. (The number of patterns that can be
saved varies with the setting in the [MEMORY] submenu of
[SETUP] menu.)
See "[DSK SOURCE]" for saving title keys ( page 11).
The following diagram shows an example of the title key.
Back matte video
The [TITLE KEY] menu is used to create a title key.
[TITLE KEY] menu
The menu appears when a still picture saved in title
memory is called with the pattern number 9501 or larger
from the [DSK SOURCE] > [MODE] submenu of the [DSK
FADE] menu ( page 11).
POS. X 128 Y 128
Z 512
EVENT ME TIME
00 02:00
E F
TITLE KEY
KEY SLICE
CROP
0
EFFECTS
OFF
BORDER COLOR
WHITE
Scroll the screen to display.
 NOTE
• The title keys saved in memory are erased when the power
is turned off. Since memory is empty when the unit is
restarted, the [TITLE KEY] menu is not displayed even if a
pattern number of the title key after No. 9501 is specified.
• When a title key is called during execution of the
downstream key, [DSK EFECTS] (DSK effect) is set to [OFF].
• Title keys cannot be set if the title memory count is set
to 0 in the [MEMORY] submenu of the [SETUP] menu
( page 27).
Title
PATTERN INT
9501 WHT
SLOPE K LEVEL
0 15 255
0 0 0