Safety Symbol Guide - SoundCraft SX2404 User Manual

Soundcraft SX Series User Guide V1.0
IMPORTANT SAFETY INSTRUCTIONS
As the colours of the wires in the mains lead may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
•
The wire which is coloured Green and Yellow must be connected to the terminal in the plug
which is marked with the letter E or by the earth symbol.
•
The wire which is coloured Blue must be connected to the terminal in the plug which is
marked with the letter N.
•
The wire which is coloured Brown must be connected to the terminal in the plug which is
marked with the letter L.
•
Ensure that these colour codes are followed carefully in the event of the plug being
changed.
This unit is capable of operating over a range of mains voltages as marked on the rear panel.
FOR YOUR OWN SAFETY AND TO AVOID INVALIDATION OF THE WARRANTY PLEASE READ
THIS SECTION CAREFULLY.

SAFETY SYMBOL GUIDE

For your own safety and to avoid invalidation of the warranty all text marked with these sym-
bols should be read carefully.
WARNINGS
The lightning flash with arrowhead symbol, is intended to alert the user to the
presence of un-insulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
CAUTIONS
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
NOTES
Contain important information and useful tips on the operation of your
equipment.
HEADPHONES SAFETY WARNING
Contain important information and useful tips on headphone outputs
and monitoring levels.
5