Changing External Parts (1) - ELNA 9500 Service Manual

(A)
q
w
(C)
(D)

Changing External Parts (1)

w
(B)
e
r
Replacing the face cover
To remove:
1 Remove Screws (A) (2 pcs) and remove the face
q
cover .
To attach:
2 Follow the above procedure in reverse.
Replacing the top cover
To remove:
1 Open the face cover.
2 Remove the caps
(C).
Raise the carrying handle
3 Raise the top cover and disconnect the bobbin
winder connector
side.
• Presser dial comes off together.
To attach:
4 Raise the carrying handle, insert the top cover
from rear side.
5 Connect the bobbin winder connector to the A
board.
6 Tighten Screws (B), (C), (D).
7 Attach the caps.
1
9500
w
(2 pcs), Screw (B) and Screw
e
and remove Screw (D).
r
. Renove the top cover from rear