Subscribe to Our Youtube Channel
Related Manuals for Lincat Opus OE7205
Summary of Contents for Lincat Opus OE7205
- Page 1 User and Installation and Instructions Opus 700 Electric Griddles OE7205, OE7206, OE7209 IS193 ECN3444...
-
Page 2: Section 1 - Technical Data
Please read the following carefully before using this appliance. Warnings and Precautions Please ensure that all commissioning checks and initial start-up procedures have taken place. This manual should be kept in a safe and accessible place for future reference. This appliance is designed for professional use and must only be operated by qualified personnel. Please ensure that the appliance is serviced regularly by a competent catering equipment engineer. - Page 3 Depth, excluding handles (mm) 55-80mm Legs adjustable within range (mm) 73.6 Kg Weight (Kg) 618 x 548 Griddle Cooking Surface – W x D (mm) 4.0 kW Griddle Rating - per control 3N~ and earth Electricity supply requirements (4.0 kW) (4.0 kW) (0.0 kW) 3N~ (three phase supply) 400 V Voltage 3N~...
-
Page 4: Section 2 - Installation
SECTION 2 – INSTALLATION 2.1 PREPARATION Green neon (Mains on) Amber neon (L/H Griddle Plate) Amber neon (R/H Griddle Plate) Fat Drawer L/H Griddle Plate Control Knob R/H Griddle Plate Control Knob Remove all packaging and protective coatings prior to installation. 2.2 SITING The appliance must be installed in accordance with the appropriate regulations listed prior. -
Page 5: Operation
2.4 COMMISSIONING 2.4.1 GRIDDLE CONTROLS The cooking area of the griddle plate is separated into two heat zones, operated by the two control knobs. The left control knob is responsible for heat input to the left side of the griddle and the right knob has the right hand side. -
Page 6: Section 3 - User Instructions
SECTION 3 – USER INSTRUCTIONS 3.1 GRIDDLE PLATE PREPARATION Before using the appliance for the first time, wipe off protective oil from the griddle plate and wash it down with a warm detergent solution and prepare the unit as follows: OE7205, OE7206 and OE7209 fitted with carbon steel griddle plate. -
Page 7: Griddle Plate Cleaning
Once clean and dry, the plate should be protected with a light coat of cooking oil. For heavy, stubborn deposits a de-greasing agent ‘CARBON-OFF’ is available from Lincat upon request. Note: The fat collection drawer capacity is 1.5 litres. -
Page 8: Section 4 - Component Replacement
SECTION 4 – COMPONENT REPLACEMENT 4.1. NEON REPLACEMENT 1. Remove the screws securing the fascia panel to the base panel, hold the fascia panel at the bottom and rotate forward. 2. Protect the surrounding panel work with soft material and support the fascia panel against it. Access to the power neon is now possible. -
Page 9: Section 5 - Additional Information
OE7205 SCHEMATIC WIRING DIAGRAM (E198). TE45 NE39 CO112 TH12 EL201 NE40 CO112 TH12 EL201 NE40 OE7206 & OE7209 SCHEMATIC WIRING DIAGRAM (E199). TE45 NE39 CO112 TH12 EL201 NE40 EL202 CO111 TH12 EL202 NE40 SECTION 5 – ADDITIONAL INFORMATION IS193 ECN3444... - Page 10 Griddle Floor Stand installation instructions OA7905 - 700mm wide Floor Stand OA7914 – 900mm wide Floor Stand To fit the griddle to the above floor stand proceed as follows: 1. Remove feet from counter top unit. 2. Put 30mm packer on top frame side channels, taking care not to cover mounting holes and position unit on top. 3.
-
Page 11: Service Information
If possible please quote the product code of the part you require. Lincat reserve the right to carry out any work under warranty during normal working hours, i.e. Monday to Friday, 8.30 a.m. – 5.00 p.m.
Need help?
Do you have a question about the Opus OE7205 and is the answer not in the manual?
Questions and answers