Replacement Tires - Fiat 2015 500e Owner's Manual

256 STARTING AND OPERATING

Replacement Tires

The tires on your new vehicle provide a balance of many
characteristics. They should be inspected regularly for wear
and correct cold tire inflation pressures. The manufacturer
strongly recommends that you use tires equivalent to the
originals in size, quality and performance when replacement
is needed. Refer to the paragraph on "Tread Wear Indicator."
Refer to the Tire and Loading Information placard or the
Vehicle Certification Label for the size designation of your
tire. The Load Index and Speed Symbol for your tire will be
found on the original equipment tire sidewall. See the Tire
Sizing Chart example found in the Tire Safety Information
section of this manual for more information relating to the
Load Index and Speed Symbol of a tire.
It is recommended to replace the two front tires or two
rear tires as a pair. Replacing just one tire can seriously
affect your vehicle's handling. If you ever replace a
wheel, make sure that the wheel's specifications match
those of the original wheels.
It is recommended you contact your authorized tire dealer
or original equipment dealer with any questions you may
have on tire specifications or capability. Failure to use
equivalent replacement tires may adversely affect the safety,
handling, and ride of your vehicle.
WARNING!
• Do not use a tire, wheel size or rating other than
that specified for your vehicle. Some combinations
of unapproved tires and wheels may change sus-
pension dimensions and performance characteris-
tics, resulting in changes to steering, handling, and
braking of your vehicle. This can cause unpredict-
able handling and stress to steering and suspen-
sion components. You could lose control and have
a collision resulting in serious injury or death. Use
only the tire and wheel sizes with load ratings
approved for your vehicle.
(Continued)