THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23
EVSE Operation And Status Information
Indicator
Description
2 — Fault Indicator
Green indicates READY
LED
RED indicates a fault
2
3 — Charge Level
All ON indicates system ready
Indicator LED's
and not charging
LED's turning on and off in
sequence indicates vehicle
charging
When the EVSE is first plugged in it will go through an
initialization and self test. For the first three seconds after
plugging in your EVSE all the LED's will remain off.
After approximately three seconds the EVSE performs an
EVSE Status Indicators
internal self test and Ground Continuity Test. This pro-
cess takes approximately six seconds.
Indicator
Description
During the internal self test the unit turns on one Charge
1 — AC Indicator
Green indicates READY
Level Indicator LED every 1.5 seconds until all the
LED
RED Indicates a fault
Charge Level Indicator LED's are illuminated.