Speaker Phone Feature - ADT Safewatch QuickConnect Plus User Manual

If this feature has been programmed, the ADT Safewatch
capable of operating as a speaker phone. During speaker phone operation, the system will provide the
following functions:
•
All function/event processing will continue to operate, but there will be no announcements.
•
The ARMED (red) and READY (green) LEDs will alternately blink.
•
"PH Speakerphone" will be displayed.
NOTE: The system will enter the Speaker Phone mode even if an alarm or trouble is stored in the system
memory. Although "PH Speakerphone" may not appear, the LEDs will alternately blink indicating
you are currently in the Speaker Phone mode.
Do not use the speaker phone as the only telephone in your home since in some special cases the

speaker phone is not functional.
The system will not enter Speaker Phone mode and ADT Safewatch
•
The feature has not been programmed.
•
A report is being sent.
•
An audible alarm is present.
•
An announcement is being made or a recorded message is being played back.
•
A message is being recorded.
•
The system is in test or sniffer mode.
•
AC power is not present
The speaker phone will be aborted if:
•
A report must be sent.
•
An audible alarm or trouble has ocurred.
•
AC power is lost.
Using the Speaker Phone Feature
When the ADT Safewatch
mode, the system keypad functions as a telephone keypad and the only security keypad functions that
will remain enabled are the panic keys and the speaker volume control. (refer to Volume Adjustment
section) You may adjust the volume before entering speaker phone mode or after dialing the desired
number. In the speaker phone mode, if a zone is violated and has triggered an entry/exit delay, the
system will automatically change the keypad from telephone to security mode. This allows the user to
disarm the system or take other appropriate actions in the security mode without interrupting the
telephone session. To regain telephone keypad control (i.e., to enter an account number or menu
selection) you will need to reactivate the telephone keypad.

QuickConnect Plus
– 27 –
USER FUNCTIONS

Speaker Phone Feature

 QuickConnect Plus

QuickConnect Plus will not ring if:
Security System is operating in the Speaker Phone
Security System is