Pride Victory XL-4 Owner's Manual page 18

I V .
Speed Adjustment Dial
This dial allows you to preselect and limit your maximum speed.
n Set the dial to one of five settings from the slowest (image of the tortoise) to the fastest (image of the
hare) speed setting.
Key Switch
This switch enables you to power up (turn on) and power down (turn off) your scooter.
n Fully insert the key into the key switch and turn the key clockwise to power up your scooter.
n Turn the key anticlockwise and remove it from the key switch to power down your scooter.
WARNING! If the key is removed from the key switch while your scooter is in motion, the electronic
brakes will engage and your scooter will come to an abrupt stop!
Throttle Control Lever
This lever allows you to control the forward and reverse speeds up to the maximum you preset with the
speed adjustment dial. For instructions on how to operate the throttle control lever, see VI. “Operation.”
Light Switch
This switch enables you to control the headlight and running (rear red) lights. Pride recommends that you
should turn your lights on whenever there is less than optimal lighting necessary for safe use.
Hazard Lights Switch
This switch enables you to control the front and rear hazard (amber) lights.
n Toggle this switch to turn the hazard lights on and off.
Horn Buttons
These buttons activate a warning horn.
n Ensure the key is fully inserted into the key switch and push either button to sound the horn.
Left And Right Turn Signal Switches
Use these switches to turn on the left and right turn signal (amber) lights. Each switch will activate both the
left and the right turn signal lights.
1. Push either the left or the right switch once in the direction you wish to turn to activate the light.
2. Push the switch again in the same direction to turn off the light.
18
Y O U R V I C T O R Y X L - 4
Victory XL-4