Side Panel; Bottom Panel - Yamaha PJP-50USB ProjectPhone Quick Start Manual

Side panel

1 USB port
Connect to the PC using a USB cable.
2 DC IN 12V terminal
Connect the provided AC adapter.

Bottom panel

2
1
Top screen
Volume
1 2
1 2
DC IN 12V
3 AUDIO IN terminal
Connect to the line output terminal or the headphone
output terminal of an audio equipment or PC.
4 AUDIO OUT terminal
Connect to the line input terminal or the microphone input
terminal of an audio equipment or PC.
1 Serial label
The label carries the following information.
• MODEL No.: Model number of this unit.
• SER.: Serial number for use in management/
2 Arrayed speakers
The four arrayed speakers on the bottom panel for use in
output of the audio.
3 Adjuster
If you cannot place this unit stably because of the shape of
the desk or other reasons, adjust the foot height using the
adjuster.
2 3
1 USB mode
Displays the setting of the USB mode.
AUD
TEL
2 MIC
Displays the audio input level of the microphones.
3 Volume
Displays the audio output level of the speakers.
345
4 USB indicator
Lights up when this unit is connected to the PC using a
USB cable.
5 Speaker mute
Lights up when the speakers are muted.
3 4
IN AUDIO OUT
distinction of this unit.
: This unit functions in the audio mode.
: This unit functions in the telephony mode.
English 17