How To Maintain Your Vacuum Cleaner - Eureka 430 Series Owner's Manual

How to Maintain Your Vacuum Cleaner

Make sure vacuum cleaner is turned off and power cord is unplugged
Clean Brush Roll
Turn vacuum face down on floor. Use scissors
to remove hair and threads from brush roll.
(Fig. 1).
'Check Brush Roll' Light
Turn vacuum off and unplug if indicator light
turns on. Remove debris that caused the
brush roll motor to stall (Fig. 2).
How to Clear a Blockage
Hose Blockage
Remove hose end from hose retainer. Flexing
the hose will loosen any blockage (Fig 3).
Twist hose connector tab clockwise to remove
hose from vacuum body. Clear blockage from
hose inlet (Fig. 4).
Blockage in Vacuum Base
Turn vacuum face down on floor.
Squeeze latch to remove cover from
clean-out port. (Fig. 5).
Use finger to locate and remove clog
from base.
If still clogged, push in lock button and pull
floor nozzle off vacuum body. Remove clog
from neck of floor nozzle (Fig. 6).
4
Eureka Customer Service HELPLINE 1-800-282-2886
Fig. 1
Fig. 3
Fig. 5
Fig. 2
Fig. 4
Fig. 6
www.eureka.com