SoftBank 940N User Manual page 39

Battery & Charger
Using Desktop Holder
1
Desktop Holder is sold separately.
Arrows up
1
Connector
AC Outlet
2
Blades
AC Charger
1
-16
3
Desktop
4
Holder
1
Insert Charger connector into Desktop Holder
2
Plug Charger into an AC Outlet
3
Place handset in Desktop Holder
Charging Indicator lights red while charging. When charging is
complete, Indicator goes out.
4
Lift out
Note
Battery can only be charged while inserted in handset.
When both Charging Indicator and Display Indicator
Charge Unusual Stop Charge appears, disconnect handset from AC
Charger and remove battery. Set up handset and Charger and start
charging again. If the same error occurs, AC Charger may be faulty or a
non-specified charger is being used. Contact SoftBank Mobile Customer
Center, Customer Assistance (P. 15-61).
When both Charging Indicator and Display Indicator
temperature is unsuitable for charging (Temperature Warning). Wait until
handset cools down.
More Features
Customize
Backlight
Set Backlight during Charging
Sounds
Set to Play Charging Start/End Tones
go out and
flash, handset

( P. 14-5)

( P. 14-10)