Using The Inner Connector(S) - Acer P5227 Series User Manual

Using the inner connector(s)

Turn the projector off by pressing
minutes to cool down. Disconnect the power cord.
1 Use a screwdriver to remove the screw(s) from the cover. (Illustration #1)
2 Push up and remove the cover. (Illustration #2)
3 Locate the HDMI (MHL) connector and/or USB Type A connector beside the
focus/zoom ring.
4 Insert the WirelessHD dongle (MWIHD1) or other HDMI/MHL dongle into
the HDMI (MHL) connector. (Illustration #3)
5 A micro USB cable is also availale if you need to power the HDMI/MHL
dongle.
6 Replace the cover and tighten the screw(s). (Illustration #4 - #5)
4
5
1
(POWER). Allow the projector at least 45
2
1
3
5
or
3
45