Introduction; Installation And Conþguration Tasks; Packaging - Motorola MPMC101 Installation And Use Manual

Introduction

This chapter contains instructions for installing the MPMC101 and
MPMC102 SCSI-2 adapters onto a carrier board.
Installation and Configuration Tasks
Perform the following tasks to install and configure the
MPMC101/MPMC102:

Packaging

The MPMC101/MPMC102 is packed in an anti-static package to
protect it from any static discharge. Observe standard handling
practices of static sensitive equipment.
Install the MPMC101/MPMC102 on the carrier board per the
instructions in Installing the Adapter on the Carrier Board on
page 2-2.
Connect the SCSI cables per the instructions in Connecting to
the SCSI Bus on page 2-6.
Power-up the system/Start the MPMC101/MPMC102 per
the instructions in the system chassis manual.
Install the AIX SCSI-2 controller device driver per the
instruction in Chapter 3.
Configure the SCSI devices per the guidelines in Configuring
the SCSI Devices on page 2-8.
Reboot the system.
2Installation
2
2-1