Motorola MPMC101 Installation And Use Manual page 8

All Motorola printed wiring boards are manufactured by UL-recognized
manufacturers, with a ßammability rating of 94V-0.
This equipment generates, uses, and can radiate electro-
!
magnetic energy. It may cause or be susceptible to
electro-magnetic interference (EMI) if not installed and
Warning
used in a cabinet with adequate EMI protection.
European Notice: Board products with the CE marking comply with the
EMC Directive (89/336/EEC). Compliance with this directive implies
conformity to the following European Norms:
EN55022 (CISPR 22) Radio Frequency Interference
EN50082-1 (IEC801-2, IEC801-3, IEEC801-4) Electromagnetic Immunity
The product also fulÞlls EN60950 (product safety) which is essentially the
requirement for the Low Voltage Directive (73/23/EEC).
This board product was tested in a representative system to show
compliance with the above mentioned requirements. A proper installation
in a CE-marked system will maintain the required EMC/safety
performance.