Introduction; Installation And Conþguration Tasks - Motorola MPMC221 Installation And Use Manual

Introduction

This chapter contains instructions for installing the MPMC221 and
MPMC222 FDDI adapters onto a carrier board.
Installation and Configuration Tasks
Perform the following tasks to install and configure the MPMC221/
MPMC222:
Install the MPMC221/MPMC222 on the carrier board per the
instructions in Installing the Adapter on the Carrier Board on
page 2-2.
Connect the FDDI cables per the instructions in Connecting to
the FDDI Network on page 2-5.
Power-up the system per the instructions in the system
chassis manual.
Install the AIX MC68840 IFDDI controller device driver (if the
MPMC221/MPMC222 installation is a system upgrade) per
the instruction in Chapter 3.
Set the adapter characteristics and Configure TCP/IP per the
guidelines in Configuring the MPMC221/MPMC222 on page
2-10.
Reboot the system.
2Installation
2
2-1