Introduction; Installation And Conþguration Tasks; Packaging - Motorola MPMC202 Installation And Use Manual

Introduction

This chapter contains instructions for installing the MPMC202 Fast
Ethernet module onto a carrier board.
Installation and Configuration Tasks
Perform the following tasks to install and configure the MPMC202:
Install the MPMC202 on the carrier board per the instructions
in Installing the MPMC202 on the Carrier Board on page 2-2.
Connect the RJ-45 cables per the instructions in Connecting the
Fast Ethernet Cable on page 2-5.
Power-up the system/Start the MPMC202 per the
instructions in the system chassis manual.
Install the AIX Fast Ethernet LAN controller device driver (if
the MPMC202 is a system upgrade on an MVME130 x or
MVME160 x carrier board) per the instruction in Chapter 3.
Set the adapter characteristics and Configure TCP/IP per the
guidelines in Configuring the MPMC202 on page 2-8.
Reboot the system.

Packaging

The MPMC202 is packed in an anti-static package to protect it from
any static discharge. Observe standard handling practices of static
sensitive equipment.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
2Installation
2
2-1