Installation And Setup - D-Link DNR-202L User Manual

Section 2 - Installation

Installation and Setup

Step 1
Insert the Installation CD-ROM into your computer's optical drive to start the
autorun program. Click Start to begin the wizard.
Windows Users:
The CD-ROM will open the Setup Wizard. The Setup Wizard will guide you through
the installation process to configure the NVR.
Note:
If the autorun program does not automatically start on your computer, go to
Windows and click Start > Run. In the Run command box type D:\autorun.exe,
where D: represents your CD-ROM drive.
OS X Users:
Insert the DNR-202L Driver CD in the CD -ROM drive. After you have inserted the
CD into your computer, go to the CD drive directory, and double-click the Mac
Utility folder to enter.
Step 2
Connect your USB hard drive to the DNR-202L and click Next to proceed.
D-Link DNR-202L User Manual 9