D-Link DNR-202L User Manual page 34

Section 5 - Configuration
7 Full Screen
8 Auto Scan
9 Actual Size
10 OSD
11 Snapshot
12 Manual Record
13 Audio
14 Live/Playback
15 Log In/Out
16 Info Sections
Notes:
• Snapshot: Right-click on the video and select the snapshot function to capture an image immediately.
• Right-clicking on the video will show the option to Switch to Full Screen. Press the ESC button on the keyboard to return
to normal view.
• Swap: Right-click on the video and select a channel under Swap to display a different video channel in that window.
D-Link DNR-202L User Manual
Select to display the video on full screen. Press the ESC button on the keyboard to return
to normal view.
Activate auto scan to cycle through the channels/cameras on the display.
Switch the video to the actual size or fill the window.
Display the information on the video.
Click this icon to take a snapshot of the active stream.
Click to enable or disable recording manually.
Click to enable or disable audio from the selected camera's microphone (if camera
supports audio). When enabled, you can adjust the volume via the slider.
Switch between the Live View and the Playback pages.
Click this to log in or out of the NVR.
This section contains various detailed information about the NVR. You can collapse or
restore each section for viewing by clicking on the title bar.
34