Section 5 - Configuration
Cameras in your network can be added to your NVR from this page. You can then view camera information and preview the
camera's feed. To add cameras, follow the steps below:
Click Search at the top left and the NVR will automatically
search for all compatible cameras on the same network.
Once it is detected in the top left window, click on
the camera to highlight it and its information will be
displayed on the bottom right.
Enter the User Name and Password of the selected
Select a channel from the Add to Channel drop-down
Click Add and the selected camera will be added to the
Camera List window at the top right.
Click Save to finish adding the camera.
D-Link DNR-202L User Manual