Adjusting The Downmix Audio Effect (For Two-Zone Operation); 7-Band Equalizer - Blaupunkt Chicago IVDM-7002 Operating Instructions Manual

Setup Menu
Adjusting the downmix audio effect (for two-zone opera-
tion)
Music is only played through the front loudspeakers when down-
mix is active.
You can switch the downmix mode on or off using the DOWNMIX
key on the remote control.
You are in the AUDIO setup menu.
1. Use the / keys to select the Audio Effect Control
sub-menu, and press the ENTER key.
The "ProLogic2" option is highlighted.
2. Use the / keys to select the "DownMIX" option.
Audio Effect Control
audio Effect Control
AUDIO
AUDIO
ProLogic2 ProLogic2
SFC SFC
DownMIX DownMIX
NEXT NEXT
ENTER :SET
ProLogic2 ProLogic2 Music Music
OFF OFF
Studio Studio Hall Hall Church Church
OFF OFF
Lt/Rt Lt/Rt Stereo Stereo
VSS VSS
SRC : MENUE CHANGE RETURN :BACK SETUP :END
You can make the following settings:
Lt/Rt: Mix the surround-sound for the rear loudspeakers into
the signal for the front loudspeakers
Stereo: Convert the surround-sound into a stereo signal
VSS: Virtual surround-sound
3. Choose the setting you want with the
4. Confirm your selection with the ENTER key.
5. Press the / RETURN key to close the menu.

7-Band equalizer

7Band Equalizer
7Band equalizer
AUDIO AUDIO
7EQ ITEM
NEXT NEXT
ENTER :SET
/ keys.
FLAT
SRC : MENUE CHANGE RETURN :BACK SETUP :END
51