Delta Environmental Products ECOPOD-N Series Safety Instructions Installation And Service Manual page 11

INDIVIDUAL MECHANICAL WASTEWATER TREATMENT SYSTEM
INITIAL POLICY:
A two year initial service policy shall be furnished to the user by the manufacturer or the distributor through the dealer. This policy is
included in the original price and shall provide the following:
1. An inspection/service call every six months, which includes inspection, adjustment, and servicing of the mechanical and electrical
component parts as necessary to ensure proper function.
2. An effluent quality inspection every six months consisting of a visual check for color, turbidity, scum overflow, and an examination for
odors.
3. A sample shall be pulled from the aeration tank every six months as described in the "SOLIDS REMOVAL" section to determine if
there is an excess of solids in the treatment plant. If the test results determine a need for solids removal, the user will bear the cost
and responsibility for doing so.
4. If any improper operation is observed which cannot be corrected at that time, the user shall be notified immediately in writing of the
conditions and the estimated date of correction.
CONTINUING SERVICE POLICY:
An annually renewable service policy affording the same coverage as the Initial Service Policy is available. Consult your dealer for pricing
information.
PARTS:
Replacement parts or components may be obtained from your local distributor or directly from Delta Environmental Products.
COMPLAINTS:
In order for Delta Environmental Products to properly address complaints, we require that you put in writing the date and nature of the
complaint as detailed as possible. This must include the Serial Number of your system.
Send to: Delta Environmental Products
P. O. Box 969
Denham Springs, LA 70727-0969
DELTA ENVIRONMENT PRODUCTS
SERVICE POLICY
11