Engineering Mode Overview - Casall T800 Service Manual

4.2 ENGINEERING MODE OVERVIEW

MODE FUNCTION
ENG 0 Display Test
ENG 1 Hardware Test
ENG 2 Auto Calibration
ENG 3 Switch Function
ENG 4 Information
Software Version
SECOND LEVEL
ENG 8
※ ※ ※ ※ "START" key to save the change.
CHAPTER 4: Engineering Mode
Start Key – LCD/LED on
Stop Key – LCD/LED off
Any Other Key - Will show on the display window.
Hold the STOP key for 3 seconds to return to the Engineering Menu.
Motor & Incline Motor Test.
Digital MCB, unnecessary to do Auto Calibration. Press the START key, the
words "NO FUNCTION" will scroll on the screen.
Use the INCLINE or SPEED UP and DOWN keys to switch DEMO MODE off
or on (Demo on=0 & Demo off=1 on the DISTANCE window)
Use the START key to select unit (1=KM & 0=Mile on the TIME window)
Use the ENTER key to select the languages.(English, Germany, Dutch,
French will scroll on the middle window). Press the ENTER key to withdraw
the languages selection.
Accumulated Time and Distance
Press and hold the START key for 5 seconds to clear all data.
Remarks: Unit of Time is Hour on the TIME window.
Unit of Distance is KM or Mile based on your set on the DISTANCE
window.
To Get to ENG 8 - Enter into ENG 3, the press and hold the SPEED UP and
INCLINE DOWN key at the same time for 3-5 seconds.
Press ENTER at P0 - Software version.
Press ENTER at P1 - Select speed up rate (normal or quick).
Press ENTER at P3 - Hold the START key to clear all data.
DESCRIPTION
15