Related Manuals for Casall T600
Summary of Contents for Casall T600
- Page 1 TREADMILL OWNER’S MANUAL Read the TREADMILL gUIDE before using this OWNER’S MANUAL. Casall_T600_T800_OM_20110531.indd 1 2011-06-01 16.18...
- Page 2 Before proceeding, find your treadmill’s serial number located on the front stabilizer tube and enter it in the space provided below. Also locate the model name which is next to the serial number. ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW: SERIAL NUMBER: cAsAll TREADMIll MODEL NAME: Casall_T600_T800_OM_20110531.indd 2-3...
-
Page 3: Tools Included
PRE ASSEMBLY TOOls INclUDED: F 6 mm T-Wrench TOUCH PAD PANEL AND DISPLAY WINDOWS UNPAcKING F 5 mm L-Wrench SPEAKERS F 4 mm L-Wrench Place the treadmill carton on a level flat surface. It is recommended that you place a F 4 mm T-Wrench protective covering on your floor. -
Page 4: Assembly Step
ASSEMBLY sTEP 1 ASSEMBLY sTEP 2 Cut the yellow banding straps and lift the Open hardware bag 2. HARDWARE BAG 1 CONTENTS : HARDWARE BAG 2 CONTENTS : running deck upward until the foot With the running deck in the raised latch locks. - Page 5 ASSEMBLY sTEP 3 ASSEMBLY sTEP 4 Open hardware bag 3. Disengage the deck lock latch with your HARDWARE BAG 3 CONTENTS : HARDWARE BAG 4 CONTENTS : foot to lower the running deck. Pull lead wire through right conSole BOLT (D) SPRING WASHER (B) FLAT WASHER (C) BOLT (A)
- Page 6 ASSEMBLY sTEP 5 ASSEMBLY sTEP 6 Open hardware bag 5. HARDWARE BAG 5 CONTENTS : Align Support bar with holes in conSole BOLT (A) maStS. MODEls MODEls 15 mm Qty: 4 Insert boltS (a) into all 4 holes of the Support bar.
-
Page 7: Treadmill Operation
TREADMILL OPERATION This section explains how to use your treadmill’s console and programming. The BASIC OPERATION section in the TREADMILL gUIDE has instructions for the following: • lOcATION OF THE TREADMIll • UsING THE sAFETY KEY • FOlDING THE TREADMIll •... - Page 8 T600 cONsOlE OPERATION Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use. A) DIsPlAY WINDOWs: time, distance, calories, heart rate, speed, incline and workout profiles. B) AlPHANUMERIc DIsPlAY: displays goal and program information.
- Page 9 T800 cONsOlE OPERATION Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use. A) DIsPlAY WINDOWs: time, distance, calories, heart rate, speed, incline and workout profiles. B) AlPHANUMERIc DIsPlAY: displays goal and program information.
-
Page 10: Display Windows
DIsPlAY WINDOWs GETTING sTARTED casall T600 DISPLAYS NOTE: If no TARgET or WORKOUT is selected, the program will function as a MANUAL program. All changes in speed 1) Check to make sure no objects are placed on the • TIME: Shown as minutes : seconds. View the time and incline will need to be from the user in this setting. - Page 11 TARGET PROFIlEs TARGET 1 – TIME: Allows user to set a target based on how long they would like to workout. Time targets can range 3) HIlls: Simulates running up and down hills to improve stamina. from 15:00 – 99:00. TIME will count down. DISTANCE and CALORIES will count up from zero. Segment Warm Up Segments 1–8...
- Page 12 UsING cUsTOM WORKOUTs (cAsAll T800 ONlY) GOAl cENTER™ 1) Select User by using the or + / – keys and press enter Research shows that those who create and track their fitness goals, on average, achieve greater success than those who do not.
-
Page 13: Ipod ® Docking Station
TO REsET THE cONsOlE IPOD DOcKING sTATION ® Hold STOP key for 3 seconds. (cAsAll T800 ONlY) RUBBER PLUG The iPod docking station is the entertainment solution for your workouts. FINIsHING YOUR WORKOUT DOCK Various iPod models with a dock connector can fit this dock. IPhone is not INSERT When your workout is complete, the monitor display will flash “FINISHED”... - Page 14 Casall_T600_T800_OM_20110531.indd 26-27 2011-06-01 16.18...
- Page 15 TREADMILL OWNER’S MANUAL casall T600 & casall T800 Treadmill Owner’s Manual Casall_T600_T800_OM_20110531.indd 28 2011-06-01 16.18...