Samsung JS8500 E-Manual page 114

HDMI UHD Color
●
Allows you to set the
When set to On, the TV optimises processing of UHD 50P/60P signals.
"
If you set the HDMI connector to On, the TV turns off and then on automatically.
"
For 7 series models or higher, each HDMI connector can be individually optimised for
When you connect the TV to the external device that supports only UHD 24 or 30 Hz frequency or any
FHD frequency, the
to Off.
"
For the 6 series models or lower, make sure to connect to the HDMI IN (STB/DVI) port of the TV.
"
The HDMI connector with
while the HDMI connector with
input signals. For more information, refer to "Supported Resolutions for each of UHD Input Signals".
Film Mode
●
Try Now
Optimises the picture quality for movies.
"
This function is only available when the input signal is TV, AV, Component (480i, 1080i), or HDMI
(1080i).
Auto Motion Plus
●
Removes blurring and judder from scenes with rapid movement. If you select Custom, you can
Blur Reduction
configure
sharper LED image. To return to the default settings, select Reset.
"
LED Clear Motion
When
"
LED Clear Motion
If
Try Now
HDMI UHD Color
HDMI UHD Color
function may not be available. In this case, set
HDMI UHD Color
HDMI UHD Color
Try Now
Judder Reduction
and
is On, the screen appears darker than when it is Off.
On
is at 60Hz video signal, the screen may flicker.
On Off
mode to or for each HDMI connector on the TV.
Off
set to supports up to UHD 50P/60P 4:2:0 input signals,
On
set to supports up to UHD 50P/60P 4:4:4 and 4:2:2
manually and set
HDMI UHD
HDMI UHD Color
LED Clear Motion
to
Color.
On
for a