Download  Print this page

Starting 3d - Samsung JS8500 E-manual

Hide thumbs


Starting 3D

Put on and then turn on the Samsung 3D glasses, and then select the specified
the 3D modes that are available at any given time depend on the format of the 3D content you are
Of f
Of f
Deactivates 3D viewing.
Converts normal images to 3D images.
Splits a single image into left and right overlapping images to create the 3D effect.
Splits a single image into top and bottom overlapping images to create the 3D effect.
The supported resolutions vary for each mode. For more information, refer to "Supported Resolutions for 3D
The ideal viewing distance is three times the height of the screen or more. 3D images may not appear
if you do not adhere to the recommended viewing angle or distance.
The 3D function may not work properly if there is another 3D product or an electronic device running
nearby. If there is a problem, keep other electronic devices as far away as possible from the 3D Active
The left and right 3D images may initially overlap when the TV is turned on. It takes a moment for the
display to optimise and the overlapping to stop.
When you select to use the 3D mode, note the following limitations:
3D mode is automatically disabled when you launch Smart Hub.
PIP cannot be used.
Certain picture options are disabled.
3D Mode
Try Now
Mode. Note that


Table of Contents

   Related Manuals for Samsung JS8500

This manual is also suitable for:

Ue78ju7590Ju64006500 series7000 series

Comments to this Manuals

Symbols: 0
Latest comments:
  • Erich Lang Mar 25, 2016 03:32:
    Wher can I buy the KINO KIT VG-SWD 1000