Presser Lifter Pedal Installation - Yamato VT2500 Instruction Manual

2.8 Presser lifter pedal installation

Attach the presser lifter shaft(lower) ③ on
the underside of the table and then connect the
presser lifter pedal and lifter lever ⑦ to the
presser lifter shaft(lower) ③ by chain ⑧.
（1） Attach the presser lifter shaft support
① on the underside of the table with the
screws ②.
（2） Pass the presser lifter shaft(lower) ③
through the collar ④ , return spring ⑤ ,
lifter shaft lever ⑥ and presser lifter
shaft support ① as shown in the figure.
（3） Check that the presser lifter shaft(lower)
③ turns smoothly.
When attaching pedal to the right side of table
⑦
①
⑤
⑥
⑧
To presser lifter pedal
021
⑧
200
410
②
②
④
①
③
（4） Move the collar ④ to the left and right
so that the arm of the presser lifter
shaft(lower) ③ is directly beneath the
lifter lever ⑦.
（5） Lock down the arm of the presser lifter
shaft(lower) ③ so that it is parallel to
the lifter shaft lever ⑥.
（6） Connect the arm of the presser lifter
shaft(lower) ③ and the lifter lever ⑦ ,
the lifter shaft lever ⑥ and the presser
lifter pedal by chains ⑧.
When attaching pedal to the left side of table
⑦
④
③
①
022
10
2. Installation
⑧
260
②
②
①
⑤
⑥
⑧
To presser lifter pedal
270
VT2500