Tv Channel Setup & Channel Auto Scan - Vidao 55V800R User Manual

TV Settings
To make changes your TV provider or re-scan for available broadcast channels in your area, select the Channel Menu.
Note: For Cable or Satellite users with a set-top box, there is no need to run Channel Auto Scan. Connect your cable
satellite set top box to one of the available inputs on the TV for viewing.
To enter the Channel Menu:
•
Press the MENU button
•
Using the t u arrow buttons; scroll to highlight
•
Press the down q arrow buttons to highlight Air / Cable
Cable Mode
Auto Scan
Favorite
Next
Channel List
Show/Hide
Channel Number
Channel Label
Select Cable if you subscribe to a pay television service without a set top box.
•
Press the t u arrow buttons to highlight Cable .
•
Press the q arrow button to highlight Auto Scan and press ENTER. Press the u arrow button to highlight YES
and press ENTER to begin Auto Scan.
NOTE: Channel Auto Scan may take several minutes to complete.
Air Mode
Auto Scan
Favorite
Next
Channel List
Show/Hide
Channel Number
Channel Label
Select Air when TV is connected to an indoor / outdoor antenna.
•
Press the t u arrow button to highlight Air.
•
Press the q arrow button to highlight Auto Scan and press ENTER. Press the u arrow button to highlight YES
and press ENTER to begin Auto Scan.
NOTE: Channel Auto Scan may take several minutes to complete.
TV Provider Changes &
Channel Auto Scan After Initial Setup
Are you sure to Auto
5-2
KSTP-SD
Are you sure to Auto
5-2
KSTP-SD
Channel
Scan?
No
Yes
Scan?
No Yes
55V800R-31
Analog
Digital :
RF CH :
Total Found :
Analog
Digital :
RF CH :
Total Found :
0
0
2
0
0
0
2
0