Favorite; Show/Hide; Channel Label; Tv Channel Setup & Channel Auto Scan - Vidao V4040HD User Manual

TV Settings
To make changes your TV provider or re-scan for available broadcast channels in your area, select the Channel Menu.
Note: For Cable or Satellite users with a set-top box, there is no need to run Channel Auto Scan. Connect your cable
satellite set top box to one of the available inputs on the TV for viewing.
To enter the Channel Menu:
•
Press the MENU button
•
Using the   arrow buttons; scroll to highlight
•
Press the down  arrow buttons to highlight Air / Cable
Cable Mode
Select
Select Cable if you subscribe to a pay television service without a set top box.
•
Press the   arrow buttons to highlight Cable .
•
Press the  arrow button to highlight Auto Scan and press ENTER. Press the  arrow button to highlight YES
and press ENTER to begin Auto Scan.
NOTE: Channel Auto Scan may take several minutes to complete.
Air Mode
Auto Scan

Favorite

Next
Channel List

Show/Hide

Channel Number

Channel Label

Select
Select Air when TV is connected to an indoor / outdoor antenna.
•
Press the   arrow button to highlight Air.
•
Press the  arrow button to highlight Auto Scan and press ENTER. Press the  arrow button to highlight YES
and press ENTER to begin Auto Scan.
NOTE: Channel Auto Scan may take several minutes to complete.
TV Provider Changes &
Channel Auto Scan After Initial Setup
Cable
Return
5-2
KSTP-SD
Return
Channel
Are you sure to Auto Scan?
No
Yes
Are you sure to Auto Scan?
No Yes
V4040HD-29
Analog
:
Digital :
RF CH :
Total Found :
Analog
:
Digital :
RF CH :
Total Found :
0
0
2
0
0
0
2
0