SuperNova 2
Rear Panel
The SuperNova 2's rear panel features left and right inputs (for three sources), left
and right outputs (for two configurations), left and right Input Loading and Gain
switch banks, Auxiliary Attenuation switch banks, -20db switch bank, ground lug and
power module.
Input jacks are accepted from two cartridges and one auxiliary line-level source.
•
There are two sets of output jacks (variable and fixed).
•
Input Loading (8-switch banks) and Gain (4-switch banks) are user-adjustable for
•
each cartridge.
Auxiliary Attenuation (2-switch banks) is user-adjustable.
•
The –20dB switch (for high-output cartridges) is user-adjustable.
•
Power Module connects a ribbon cable to the SuperNova Power Supply.
•
A general guide to Input Loading and Gain settings is provided on the rear panel
•
(see pages 8 and 9 for Input Loading and Gain settings charts).
5
Rear Panel (diagram)
owner's manual