SuperNova 2
Introducing: the SuperNova 2
The SuperNova 2 is an extremely versatile preamplifier that delivers an accurate,
rich, precise representation of recorded sound, allowing users to hear music as it was
meant to be heard. The SuperNova 2 accepts two phono cartridges and, if used in
Power Amp-Direct setup, an additional line-level input. The unit also has independent
Input Loading and Gain settings and comes with a Battery Power Supply that allows
the unit to run powered by four fully-rechargeable battery packs, which frees the
system from noise and distortion from AC power and improves the sound accuracy
even further.
.
The first decision to make is whether to connect the unit in the Standard
configuration (fixed or line-level output) or the Power Amp-Direct configuration
(variable output).
Standard configuration (fixed output
For reasons of convenience, many users will want to connect their SuperNova 2
•
so that it will deliver a line-level signal to a line-level destination.
We call this the Standard configuartion.
•
In this setup the SuperNova 2 might be one of several sources to be connected to
•
a standard line-level destination which controls volume and features.
If the user requires a wider dynamic range of attenuation (i.e., for quieter
•
listening), the Standard configuration is recommended.
Power Amp-Direct configuration (variable output)
Many users who listen primarily to just two source types (i.e., LPs and CDs), and
•
don't mind having a system devoted to that, will prefer connecting the
SuperNova 2 directly to a power amp.
We call this the Power Amp-Direct configuration.
•
This setup eliminates the line-stage from the signal path for cleaner sound.
•
Since most power amps do not offer independent volume control, the 11-step
•
Attenuator knob on the front panel serves as a volume control when in Power
Amp-Direct.
Two phono inputs and one line-level input are allowed.
•
Overview of the setup process:
Determine output preference and connect SuperNova 2 output jacks to their
•
destination.
Connect input cables (from turntables or line-level source) to the appropriate
•
input jacks on the rear panel of the SuperNova 2. Secure any ground wire(s) to
the grounding lug.
Set Input Loading and Gain for each source.
•
Connect the SuperNova 2 by ribbon cable to the Battery Power Supply, which
•
connects to wall power via the supplied power cord.
After powering up, fine-tune Input Loading, Gain and Attenuation (if needed).
•
3
owner's manual
)