“line level”. The Nova III may be used with a receiver or an integrated amplifier. If you use separate components, a line level control unit (preamp) is required before the power amp, since there is no built-in volume control for the Nova III.
2.0) EXTERNAL CONFIGURATION SETTINGS 2.1) BASIC GAIN SETTINGS 1 2 3 4 GAIN SWITCHES The Gain switches are located on the back panel. Use a non-metallic tool to adjust the settings (up=on, down=off). • The chart below provides a general guide to choosing Gain settings appropriate to your cartridge.
2.3) BASIC INPUT LOADING SETTINGS 1 2 3 4 6 7 8 INPUT LOADING SWITCHES To set the input loading, there are two eight-position switches, one for each channel, located on the rear panel. Refer to your cartridge owner’s manual to determine proper input loading settings.
OFF OFF OFF OFF OFF OFF OFF 3.0) AUDIO CHASSIS PLACEMENT The Nova III may be placed near your turntable if space allows, on a separate shelf in your audio rack, or on top of another source or line-level component. Please make sure that ventilation to the unit is not restricted, and that the unit is away from magnetic fields or noise from other components’...
If you have followed the above instructions along with mastering the following two user options, your Nova III is ready to play music. Simply cue down your cartridge on a favorite record, select the correct input on your receiver, integrated amp or pre-amp, and slowly bring up the volume level.
We do not assume any liability for any damage to any other component in the system due to a failure in the Nova III. If you believe your Nova III is malfunctioning, please contact the dealer where you purchased the unit, or contact:...