Cleaning - Honda CB750F2 Owner's Manual

: LEANING
. :an your motorcycle regularly to
-.:ect the surface finishes and inspect
: Camage, wear, and oil or brake fluid
] A U T I O N :
High pressure water (or air) can
d a m a g e c e r t a i n
p a r t s
o f t h e
notorcycle.
-:d spraying high pressure water
::cal in coin-operated car washes) at
r. :ollowing areas:
;:ition Switch Instruments
--:.rburetors Wheel Hubs
-::r.e Chain Muffler Outlets
-'rder
Seat Under Fuel Tank
-:ndlebar Switches
.:ake Master Cylinder
--':er cleaning, rinse the motorcycle
:-rroughly with plenty of clean water.
:::ong detergent residue can corrode
I ;i- parts.
NOTE:
* Clean the plastic parts using a cloth or
sponge dampened with a solution of
mild detergent and water. Rub the
soiled area gently rinsing it frequently
with fresh water.
2. Dry the motorcycle, start the engine,
and let it run for several minutes.
3. Test the brakes before riding the
motorcycle. Several applications may be
necessary to restore normal braking
perrormance.
4. Lubricate the drive chain
after washing and drying
cycle.
* Braking
efficiency may be temlro-
rarily impaired immediately after
washing the motorcycle. Antici-
pate longer stopping distance to
avoid a possible accident.
immediately
the motor-
a7