Cleaning For The First Time; Setting The Water Hardness Level - Miele DGC 6805 Operating And Installation Instructions

Cleaning for the first time

Water container
Accessories / Oven compartment

Setting the water hardness level

Please stick the extra data plate for the appliance supplied
with this documentation in the space provided in the "After
sales service" section of this booklet.
The appliance has undergone a functional test at the
factory. Therefore, some water may have run back into the
appliance from the pipework during transportation.
^ Remove any protective foil and sticky labels.
^ Remove the water container and clean it by hand.
^ Remove all accessories from the steam combi oven.
^ Wash them by hand using hot water and a little washing-up
liquid or in the dishwasher.
The universal tray and combi rack have been treated with
PerfectClean enamel and therefore can only be cleaned by
hand. See the instructions in the "PerfectClean" section of this
booklet.
^ Clean the universal tray and combi rack with a solution of
warm water and a little washing-up liquid applied with a
soft sponge.
^ Wipe out the interior with a damp cloth to remove any dust
or bits of packaging that may have accumulated in the
oven compartment during storage and unpacking.
The water hardness level of the steam combi oven is set to
"Hard" at the factory. For trouble-free operation of the steam
combi oven, and to ensure that it is descaled at the approp-
riate time, it is important to set the water hardness level for
your area. The harder the water, the more often the appliance
must be descaled.
^ Check which water hardness level has been set and, if
necessary, set the correct water hardness (see "Settings").
Using for the first time
31