Table of Contents
Advertisement
Back Liner, False
Bottom, and End
Panel Installation:
1.
Remove Liner Clips from
the inside of the Firebox.
2.
Place the Back Liner into
the Firebox with bends
facing the Rear Firebox
Cover.
3.
Next install the False
Bottom with larger
Dimension to Front Glass
Opening (See Right),
and secure it using DT
screws into the mounting
tabs on the Burner Tube.
4.
Place End Panels on top
of the False Bottom and
tilt into place at either end
of the Firebox. Replace
the Liner Clips.
5.
Place the bottom of the
door into the door
retainer slot, and then
secure the door with the
top latches (See Door
and Glass Information in
manual if more
information is required).
6.
To locate Valve Access
Cover, engage the tabs
into the slots in the
Access Panel Brackets
on the Fireplace.
Larger Dimension goes
to Front Glass Opening.
MQRB5143 Dimensions
MQRB6961 Dimensions
Smaller Dimension goes
Behind the Burner Tube.
32
Advertisement
Table of Contents
