Attaching The Cable Clamp Belt (Supplied) - Sony HDC3300R Operation Manual

4
Adjust the front-rear position so that the camera
handle does not interfere when you rotate the BKW-
401 arm upwards.
Attaching the Cable Clamp Belt
(Supplied)
You can secure the camera cable to the camera by attaching
the supplied cable clamp belt.
1
Insert the belt bracket into hole A or B of the cable
clamp belt.
Belt bracket
2
Remove two +B3× 5 screws and a blind screw shown
in the figure below from the camera.
Blind screw
×
+B3 5 screws
18
Preparations
Not to interfere
B
A
3
Secure the cable clamp belt to the camera, using the
two supplied +B3× 8 screws.
×
+B3 8 screws
4
1 Release the buckle, 2 bundle the cable with the
belt, 3 then lock the buckle again.
1
3
Camera cable
5
Adjust the length by pulling down the end of the belt.
2