Sony HDC3300R Operation Manual page 13

European type:
For CED (Europe) and E33 (China and South Asia) models (for PAL areas)
a INTERCOM1 and INTERCOM2 controls and switches
ENG control
PROD control
ENG PROD
MIC MIC
LINE1 PROD LINE2
OFF
ENG
INTERCOM 1
MIC LINE2 switch
MIC LINE1 switch
a INTERCOM 1 and INTERCOM 2 controls and
switches
The reception level controls are common to intercom 1 and
intercom 2. The talk lines can be set independently for
intercom 1 and intercom 2.
ENG (engineer line) control:
Adjust the intercom audio listening level of the engineer
line.
PROD (producer line) control
Adjust the intercom audio listening level of the producer
line.
PGM1 (program 1) control
Adjust the audio listening level of program 1.
PGM2 (program 2) control
Adjust the audio listening level of program 2.
TRACKER control
Adjust the intercom audio listening level at the TRACKER
connector (page 14) on the connector panel when using the
connector for intercom.
MIC LINE1 (intercom microphone line 1) switch
Select the talk line for intercom 1.
PROD: To talk over the producer line
OFF: To turn off the headset microphone for intercom
line 1
ENG: To talk over the engineer line
PGM1 control
PGM2 control
PGM1 PGM2
LEVEL
TRACKER
REAR
PROD
OFF
ENG
FRONT
INTERCOM 2
LEVEL switch
TRACKER control
b RET1 button and select switch
c RET2 button and select switch
RET1 2 3 RET2
1
4
ENG PROD PGM1
MIC MIC
LINE1 PROD LINE2 PROD
OFF OFF
ENG ENG
INTERCOM 1 INTERCOM 2
MIC LINE2 (intercom microphone line 2) switch
Select the talk line for intercom 2.
PROD: To talk over the producer line
OFF: To turn off the headset microphone for intercom
line 2
ENG: To talk over the engineer line
LEVEL switch
REAR: The intercom audio listening level is adjusted with
the controls on this panel.
FRONT: The intercom audio listening level is adjusted
with the INTERCOM LEVEL control on the front of
the camera.
b RET1 (return video 1) button and select switch
The return video signal selected with the switch is
displayed on the viewfinder screen while the button is
pressed.
c RET2 (return video 2) button and select switch
When other return video systems are used in addition to
return video 1, you can monitor the signal selected with the
switch on the viewfinder screen while pressing the button.
Note
The RET1 button has priority over the RET2 button if both
buttons are pressed.
d LIGHT switch
Set to ON to illuminate the operation panel.
d LIGHT switch
2 3
1 LIGHT
4
ON
OFF
PGM2
LEVEL
TRACKER
REAR
FRONT
Locations and Functions of Parts
13