Sony HDC3300R Operation Manual page 14

Connector panel
a EARPHONE jack
b RET CTRL connector
c CRANE connector
d TRACKER connector
e DC OUT connector
f DC IN connector
a EARPHONE jack (stereo minijack)
For connecting an earphone or headset to hear the intercom
audio.
b RET CTRL (return control) connector (6-pin)
For connection to a CAC-6 Return Video Selector.
c CRANE connector (12-pin)
For external interface, such as viewfinder and external
data.
d TRACKER connector (10-pin)
For external interface, such as intercom and tally.
e DC OUT (DC power supply output) connector
(4-pin)
To supply power to devices such as a wireless receiver
(optional).
f DC IN (DC power supply input) connector
(XLR 4-pin)
For connection to the AC-DN10 AC Adaptor to supply
power to the camera.
g INTERCOM 1 and 2 connectors (XLR 5-pin)
For input and output of intercom audio signals.
14
Locations and Functions of Parts
INTERCOM 1 INTERCOM 2
RET CTRL
EARPHONE
RET IN
CRANE GENLOCK IN
TRACKER
PROMPTER
FRONT MIC AES/EBU
LINE MIC LINE MIC
+48V +48V
OFF OFF
DC OUT
AUDIO IN
DC IN 10.5-17V
CH 1
l AUDIO IN CH1 and CH2 connectors and switches
g INTERCOM 1 and 2 connectors
REMOTE
h REMOTE connector
i PROMPTER connector
TEST
OUT
j TEST OUT connector
CH 2
SDI 2
k SDI 2 connector
h REMOTE connector (8-pin)
For connection to an RM-B170/B750 Remote Control
Unit, RCP-1000-series Remote Control Panel, or MSU-
1000-series Master Setup Unit.
Note
When the camera is connected to a CCU, do not connect
any device to this connector.
i PROMPTER (prompter 1 signal output) connector
(BNC type)
For output of the prompter 1 signal (only when a CCU is
connected).
j TEST OUT connector (BNC type)
To output the analog signal.
This also supplies the VBS signal, an HD signal nearly
equal to the signal output from the VF connector, an HD-
SYNC signal, or an SD-SYNC signal depending on which
of these you have selected on the menu.
k SDI 2 (serial digital interface) connector (BNC type)
For HD-SDI or SD-SDI signal output.