Sony HT-DDW885 Operating Instructions Manual page 73

Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
P
B
P
R
80 MHz HD Pass Through
General
Power requirements
Area code Power requirements
SP 230 – 240 V AC, 50/60 Hz
AU 240 V AC, 50 Hz
AR 220 – 230 V AC, 50/60 Hz
E51 120/220/240 V AC,
50/60 Hz
(Models of area code SP, AU only)
Power output (DIGITAL MEDIA PORT)
DC OUT: 5V, 700 mA
Power consumption
Area code Power consumption
SP, AU, E51, AR 200 W
Power consumption (during standby mode)
0.3 W
Dimensions (width/height/depth) (Approx.)
430 × 157.5 × 310 mm
including projecting parts
and controls
Mass (Approx.) 7.6 kg
/C : 0.7 Vp-p, 75 ohms
B
/C : 0.7 Vp-p, 75 ohms
R
Speaker section
• Front speakers (SS-MSP885)
• Center speaker (SS-CNP885)
• Surround/surround back speakers
(SS-SRP885)
Front speakers 2 way, magnetically
shielded
Center speaker Full range, magnetically
shielded
Surround/Surround back speakers
Full range
Speaker units
Front speakers Tweeter: 40 mm cone type
Woofer: 130 mm cone type
Center/Surround/Surround back speakers
70 mm cone type
Enclosure type
Front/center speakers
Bass reflex
Surround/surround back speakers
Close type
Rated Impedance 6 ohms
Dimension (width/height/depth) (Approx.)
Front speaker 178 × 270 × 211 mm
Center speaker 178 × 100 × 152 mm
Surround/surround back speakers
95 × 120 × 128 mm
Mass (Approx.)
Front speaker 2.7 kg
Center speaker 1.2 kg
Surround/surround back speaker
0.7 kg
continued
73 GB