Xerox DocuMate 5540 User Manual page 42

® ®
Xerox DocuMate 5540
5. Remove the roller from the scanner and discard it, it cannot be repaired.
6. Before installing the new roller, clean any dust that may have gotten on it during shipping.
7. Insert the left end of the new roller assembly into the hole in the ADF cover. Angle the roller
into the scanner and align the lock tab with the slot in the scanner.
8. Rotate the lock tab into the scanner. Press down on the lock flange to lock the roller into the
scanner.
The lock will "click" into place when it is secure. However, if it does not rotate easily into the
housing, make sure the flange is properly seated in its latch.
9. Lift the paper guide up to the back of the scanner and press gently on the paper guide until it
snaps into place.
10. Close the scanner when you're finished.
34
Maintenance
User Guide