Operation - IKH XTP6 Instruction Manual

11. Be sure there is adequate ventilation whenever you operate the engine. Do not add fuel or start
the engine in an enclosed area.
PARTS
Picture 1.

OPERATION

1. Preparation
See picture 2 for reference to assembly the handle bar. Remove the bolt 4 & adjuster 1 and attach
the adjusting steel assembly over the girder 5. Insert bolt 4 and secure it with nut. Put the adjuster 1
in, select the appropriate holes 2 and tighten the adjuster with clip 3.
Picture 2.
1. Engine
2. Girder
3. Bolt
4. Handle height adjuster 11. Belt cover
5. Break knob
6. Backward handle
7. Forward handle
1. Adjuster 2. Adjustment hole 3. Clip
8. Handle bar
9. Bolt bar
10. Drag bar
12. Mudguard
13. Tine wheel
14. Front wheel
15. Oil filler cap
16. Switch
17. Chain box
18. Tine
19. Recoil starter
4. Bolt 5. Girder