Operation - IKH XTP4 Instruction Manual

PARTS
Picture 1.

OPERATION

1. Preparation
See picture 2 for reference to assembly the handle bar. Insert the front handle bars (2) into the
girder (4) and secure them with bolts (3). Then fasten the rear handle bar (1) to the front handle
bar with bolt.
Picture 2.
SAE 10W-30 is recommended for general, all temperature use. The cap of 0.4l oil tank should be
tightened securely to prevent leakage.
Non-lead 95 gasoline is recommended as fuel. Fuel tank capacity is 3l and the cap should be
properly tightened. Wipe off the spillage before starting the engine.
1. Engine
2. Clutch lever
3. Handle bar
4. Bolt
1. Rear handle bar
5. Drag bar
6. Mudguard
7. Front wheel
8. Oil filler cap
2. Front handle bar 3. Bolt
7
9. Chain box
10. Tine
11. Recoil starter
4. Girder